שולחנות החיתוך Summa -F1612

MODELS

F1612

F1330

F1832

F2630

CUTTING AREA

160 cm (63 in.) wide x 120 cm (47 in.) long; up to 50 m (164 ft.) long in multi panel

129 cm (51 in.) wide x 305 cm (120 in.) long; up to 50 m (164 ft.) long in multi panel

185 cm (72 in.) wide x 320 cm (126 in.) long; up to 50 m (164 ft.) long in multi panel

265 cm (104 in.) wide x 305 cm (120 in.) long; up to 50 m (164 ft.) long in multi panel

MEDIA WIDTH

Up to 165 cm (65 in.)

Up to 134 cm (53 in.)

Up to 190 cm (75 in.)

Up to 270 cm (106.3 in.)

MULTI PANEL*

5000 cm (1968 in.) *Media clamps and roll-feed and/or conveyor belt system are required

REPEATABILITY

Within ± 0.05 mm on plots

ACCURACY

0.05 % of move or 0.05 mm, whichever is greater

SPEED

Up to 1000 mm/sec (39.4 in./sec)

ACCELERATION

Up to 1 G

CLEARANCE*

5 cm (2 in.) *Distance between vacuum table and Y-beam. Not taking into account the thickness of a cutting mat or conveyor belt

MAXIMUM ALLOWED FORCES

Vertical: 200 Newton, Horizontal: 200 Newton

MAXIMUM TABLE LOAD

50 kg/m² (10.2 lb/ft²)

CONNECTIVITY

USB

POWER REQUIREMENTS

3 Phase 208V+N or 3 Phase 230V or 3 Phase 400V+N

DIMENSIONS

236 x 214 x 110 cm (92 x 76 x 43 in.)

214 x 410 x 122 cm (84 x 161 x 48 in.)

270 x 425 x 122 cm (106 x 167 x 48 in.)

349 x 410 x 122 cm (137 x 161 x 48 in.)

WEIGHT

500 kg (1100 lbs)

1500 kg (3300 lbs)

1680 kg (3700 lbs)

1800 kg (3970 lbs)

OPERATING TEMPERATURE

15˚ to 35˚C (59˚ to 95˚F)

STANDARD ACCESSORIES

Drag Module, Conveyor System, Roll-Feed System, Safety Beam System, Pneumatic Pack, wireless controller w/ charger, standard 36˚ blade holder, 1 standard blade, 1 fiber-tip pen, hex screwdriver (4mm), hex screwdriver (2.5mm), USB cable (3 meter), USB extension cable (0.5 meter), media guide flanges (set of 2), CD w/ manuals and drivers, SummaFlex Pro.

OPTIONAL ACCESSORIES

Tangential Module, F Series Routing System, HF Routing System, Electronic Oscillating Tool, Pneumatic Oscillating Tool, Kiss Cutting Tool, Single Edge Cutout Tool, Double Edge Cutout Tool, Heavy Duty Cutout Tool, Creasing Tools, V-Cut Tools, production software; Automated Depth Control left (Upgrade Kit), basket (F1612), extension tables (F1612).